Dake Dura Press Force - 10/20 - Manual (Page 2)

Force 10M /Force 20M2
2 06/10
Section I
INTRODUCTION
1. This manual has been created by DAKE to give the Customer all the necessary
information for regular use and correct maintenance of the hydraulic presses in
the DURA PRESS series. It contains the use and maintenance instructions as
well as the safety and calibrating instructions requiring your direct action.
2. It is advised to keep this publication in a good condition and somewhere easily
accessible to enable rapid reference in case of need or work.
3. Starting checks and maintenance must be carried out assuring the safety of the
operators; precautions are highlighted by the symbol.
4. Periodical and punctual written notes on what has been carried out in the
maintenance phase indicates meticulousness, but above all it becomes a clear
diary of what has been done and what will have to be done at the next
maintenance deadline.
5. For further information, please do not hesitate to call our Dake Technical Service
department at 1-800-846-3253, remembering to give the model name and serial
number of your press for faster response.
6. It is strictly forbidden to modify or tamper with the machine.
7. Removal, modification or tampering with the guards and safety devises of the
press will automatically forfeit warranty and relieve the manufacturer of all liability
for any damage to things and/or persons.
8. THE PRESS IS DESIGNED EXCLUSIVELY TO BE USED BY JUST ONE
OPERATOR.
9. It is advised to read the next section carefully: List of safety checks.