Dake Dura Press Force - 10/20 - Manual (Page 12)

Force 10M /Force 20M12
12 06/10
3.0 UNPACKING
If the machine is supplied wrapped in plastic sheet, any accessories, spare parts
and expendables are packed in cardboard boxes and positioned on top of the
worktable.
To remove the packing, cut the plastic wrap, taking care not to damage the machine
or cardboard box.
Remove any accessories from on top of the worktable, check the contents
correspond to the order and to the accompanying documentation.
After removing the plastic, unbolt the lag bolts from the skid.
For handling and transport, please refer to Section 4.0 .
3.1 DISPOSING OF THE PACKING
The packing will have to be disposed of by the purchaser in compliance with their
local regulations.
The elements comprising the packing (e.g. plastic bags, polystyrene, nails, nylon,
etc.) MUST NOT be left within the reach of children as they are a source of danger
for them.
CLAIMS SHALL NOT BE ACCEPTED IN THE EVENT OF THE GOODS NOT
BEING IN CONFORMITY WITH THE ORDER OR WITH THE ACCOMPANYING
DOCUMENTS IF THEY ARE NOT NOTIFIED WITHIN FIVE DAYS OF THE
DATE OF RECEIVING THE GOODS.