Dake Dura Press Force - 10/20 - Manual (Page 7)

Force 10M /Force 20M7
7 06/10
1.4 PRESS IDENTIFICATION
The press is fitted with a rating plate fixed in a visible manner on the rear as shown
in Fig. 01 below. Dake part number and serial number on front name plate shown in
Fig. 03
The rating plate (Fig. 02/03A)
shows the identification data:
- Press model
- Max. tonnage
- Max. pressure
- Press serial number/ Year of
Manufacture
- Dake part number (Tag 03)
- Serial number (Tag 03)
FOR EVERY COMMUNICATION, REQUEST FOR SERVICE OR SPARE PARTS, IT IS
ALWAYS ESSENTIAL TO QUOTE ALL THE DATA GIVEN ON THE RATING PLATE.
1.5 SAFETY LABELS
The labels on the machine highlight particular risks or provide necessary instructions
for particular operations to be carried out in safety.
Here we reproduce the labels affixed to the press and indicate their location. The
operator will have to check that these labels are present on the machine and fixed in
a stable manner. In the event of any of them missing or having deteriorated it will be
necessary to immediately notify the person in charge of safety and to forward a
request to the manufacturer.
WARNING LABELS
To the left is the safety Alert symbol. When you see these safety alert symbols on
your press, be alert to the potential for personal injury.
Follow recommended precautions and safe operating practices.
Carefully read all safety messages in these instructions and on your press
safety signs. Keep safety labels in good condition. Replace missing or damaged
safety labels. This machine is intended to be operated by one person. This person
should be conscious of the press ram movement not only for himself but also for persons in
the immediate area of the machine.
Fig. 03A
Part No. 607
MODEL PSS
TON MAX 20
PRESSURE MAX 200
SERIAL NO.DAKE 023.98
Fig. 02