Dake Dura Press Force - 10/20 User Manual
Page 21
Force 10M /Force 20M21
21
06/10
Section 10.0
10.0 PUTTING OUT OF SERVICE
In the case of putting away for a long period it is necessary to empty the unit of oil
and protect it suitably so there is no dust, moisture, or other foreign bodies, exposed
to the unit that can damage the parts of the unit.
When putting into operation after a period of storage, meticulously follow ALL
the indications of Section 5.0.
Section 11.0
11.0 DEMOLITION AND DIVISION OF MATERIALS
If you are not going to use the appliance any more, it is recommended to make it
inoperative by removing the oil contained in the tank and eliminating the oil
remaining in the cylinder, pipes, pump body and valves.
When going for demolition the press must be treated as special waste, it must
therefore be split up into its homogeneous parts, these parts must be separately
disposed of in conformity with the laws in force.
724 Robbins Road
Grand Haven, Michigan 49417
616-842-7110 Phone 800-937-3253
616-842-0859 Fax 800-846-3253
Web:
www.dakecorp.com
E-mail :