Warning – Summers Superchisel - 3-Section User Manual
Page 70
3-4
SECTION 3 – CHISEL PLOW OPERATION
8. Fully extend depth control cylinders and maintain hydraulic pressure for 30 seconds to insure that
all air has been purged from the system.
9. Remove depth control cylinder transport locks.
NOTE: This machine has rephasing style depth control cylinders. When cylinders are
fully extended, oil will bypass through a rephasing slot on each cylinder in order to
equalize the system.
32’
to 44’
Only
WARNING
REMOVE TRANSPORT LOCK(S) BEFORE LOWERING MACHINE.
IF LOCK(S) DO NOT REMOVE FREELY, INSURE THAT
CYLINDERS ARE COMPLETELY FILLED WITH HYDRAULIC
FLUID AND ARE SUPPORTING THE LOAD TO BE LOWERED.
8Z0075