Summers Superchisel - 3-Section - Manual (Page 36)

SECTION 2 – SET-UP OF CENTER SECTION (32’-44’)
3. Block center frames off the floor.
4. Install cylinder attach brackets with 3/4” u-bolts.
NOTE: – Locate Rear Cylinder Attach Brackets (8T4224) 62” from frame center.
– Locate Front Cylinder Attach Bracket (8T4205) at front center as shown.
5. Insert eyebolts (8K1755) into each cylinder attach bracket.
– Tighten 1-1/2” nuts so the same amount of threads are above top nut on all eyebolts.
Insure that cylinder attach holes are aligned when eyebolts are tightened.
2-24