High Country Tek emc-1V - Manual (Page 4)

Part No:- 021-00351 Rev 1.0 emc-1P & emc-1V e-Fan System Controller User Guide Page 4
e-Fan Cooling System Controllers
with J1939 Interface
Welcome
Welcome to the High Country Tek Inc. (HCT) e-Fan cooling systems controller user guide, and thank you
for selecting this HCT controller to use in your application
The following information is designed to allow you to connect, set-up and optimize the emc-1P and emc-
1V modules.
If you have used HCT products before, you will recognize some of the instructions and settings. For those
of you that are new to HCT, please read the directions with care and be sure that if you have any
questions regarding this industry unique controller, then please contact us using one of the numbers
given on the back page of this manual.
We value our customers, their experience and abilities and ask that if you would like to see any additions,
subtractions or find any errors in this publication, that you contact HCT’s customer service so that we can
correct the information and make sure that our programming community is using the latest information.
If you require urgent support, more information or would like specific programming areas clarified, you can
contact us on the customer support number at 1 530 265 3236 or E-mail us through our website at
www.hctcontrols.com , giving details of your issue and how we can contact you.
Introduction
This manual is designed to provide information needed for the installation and use of the emc-1P & emc-
1V e-Fan Cooling System Controllers. Its intended user is qualified trained service personnel that
understand the hazards involved in an electromechanical environment. It is recommended that this
manual be read in its entirety before installation is begun with particular attention paid to caution and
safety information.
Cautions
Changing setup values and limits under computer control while the machine is operating may cause
sudden machine movement, which may lead to possible injury or death. It is strongly recommended that
any moving parts are disabled prior to any alignment procedure whenever possible. In any case, caution
should be exercised during any procedure and work should be completed only by qualified trained
personnel.
Warranty Information
High Country Tek Guarantees this product to be free of defects in materials and workmanship for a period
of one year extending from the date the unit was shipped from the factory. Within this time frame, High
Country Tek will provide evaluation of warranted items free of charge. Warranty repair or replacement will
be at the factory’s discretion. If necessary, contact the factory for return authorization by phone (530)
265-3236, Fax (530) 265-3275, E-Mail
[email protected] or by writing our service department at,
High Country Tek, Service Dept., 208 Gold Flat Court, Nevada City, CA 95959. To help us serve you
better, please have the units full Model / Part Number and Serial Number available when contacting the
factory for any reason. Do not return products to the factory without prior authorization and a RMA
number attached.
Controller Updates:
HCT continuously improve the controllers and make additional information and/or features available.
Please check on-line at
www.hctcontrols.com for the latest products, updated software and
controller information.