High Country Tek emc-1V - Manual (Page 19)

Part No:- 021-00351 Rev 1.0 emc-1P & emc-1V e-Fan System Controller User Guide Page 19
e-Fan Cooling System Controllers
with J1939 Interface
-> Find Controller
Will search the com ports, find the controller, and read settings. Helpful if you have lost communication
and or want to do a clean read.
Password Protection
Enter Password
Password entry is started by clicking the ‘Password’ option in the top bar of the GUI screen.
This will open a box to enter the passwords.
Passwords are ‘cAsE
SeNsitivE
’ so ensure
you have the ‘Caps
Lock’ off if required.
Level 0) - NO Password
This allows the user to view the current operational, settings, and alarms. Operator may use the help
menu and log data. Cannot change settings or load new file.
Level 1) – OEM password (
supplied with unit or contact HCT)
Access at this level gives the user full viewing as above and also allows changing of all of the system
settable parameters
. This includes the resetting of the OEM password. Does NOT allow resetting of
highest values recorded. This is module warranty information for HCT.
Level 2) – High Country Tek Inc. (Safety Reset) Password
This level of password overrides all other password levels and allows HCT authorized personnel to
access the module and the software when required for factory settings.