High Country Tek emc-1V - Manual (Page 13)

Part No:- 021-00351 Rev 1.0 emc-1P & emc-1V e-Fan System Controller User Guide Page 13
e-Fan Cooling System Controllers
with J1939 Interface
Error LED Code Descriptions for emc-1P & emc-1V
Status
Led
Error
LED
Description
Alarm Out Fan Out
Reverse
operation
Static off Normal Operation off normal normal
Flashing off Reverse Cycle off rev cycle cycle On
Static Static Fire Input on on off off
Static Static Thermistor open/short on maximum normal
Static Flashing Fan Diag. Error on retry normal
Static Flashing Alarm out short off normal normal
Static Flashing Reverse out short on normal off
Static Static Can message Timeout on maximum normal
Flashing Flashing Cooling system over‐temp on maximum manual only
Static Static Module over temp on normal normal
Note: * Fire input is available on the emc‐1P only.