High Country Tek emc-1V - Manual (Page 26)

Part No:- 021-00351 Rev 1.0 emc-1P & emc-1V e-Fan System Controller User Guide Page 26
e-Fan Cooling System Controllers
with J1939 Interface
Sensor setup
Allows for a switch input or a thermistor input and name
for either. Name is useful in data logging and on the
Dashboard monitor.
As a Thermistor input:
Check the Thermistor box, then select profile type from
pull down menu, and enter the Start, Maximum, and
Alarm temperature values, then Apply Changes.
As a Switch input:
Check the Switch box, then select Active High or Active
Low for the input. Enter a name if desired, then Apply
Changes
Apply Changes will save to the unit and close this
window. Or Cancel Changes to close window without
applying.