High Country Tek emc-1V - Manual (Page 27)

Part No:- 021-00351 Rev 1.0 emc-1P & emc-1V e-Fan System Controller User Guide Page 27
e-Fan Cooling System Controllers
with J1939 Interface
Error Information Log
Selection Tab -> Alarm Condition
This page shows the user information that will help to track and where necessary, fix intermittent opens
and short circuits on any of the wires used to connect to the sensors, switches or the coils in the system.
The program shows where the error has been seen, even if the error has cleared itself.
The information can be cleared by the user with the appropriate password level by clicking the ‘Reset’
button in the Opens and Shorts section.
Highest Readings
are stored permanently in the modules memory and cannot be reset by the user.
These are the maximum values seen on several key areas including the module health, and are only
overwritten by higher values.