High Country Tek emc-1V - Manual (Page 17)

Part No:- 021-00351 Rev 1.0 emc-1P & emc-1V e-Fan System Controller User Guide Page 17
e-Fan Cooling System Controllers
with J1939 Interface
Loading the emc-1P or emc-1V GUI onto Host PC
Both controllers are set-up via a common GUI interface for ease of use.
GUI P/N : 023-00264
The PC Graphical User Interface (GUI) is a self-extracting and installing program that will reside on the
chosen host PC hard drive. It is recommended that the user allow the defaults to be used for easy future
update installation, but the option is given to allow the user to choose where the program should be
located.
It is NOT recommended that this program be run from a network as it needs access to certain files
available only in the Windows directories.
To start the installation process, insert the CD ROM or if this does not work, search for the “setup.exe”
Application and ‘run’.
System Requirements
Windows XP, Vista or Windows7
256MB or greater
Serial Port RS232 or USB Adapter
RS232 Serial Cable PN: 999-10075