AT&T CL84200 - Manual (Page 80)

74
Int requires
two handsets
There are no registered handsets for the telephone base to
intercom.
Intercom
The handset is on an intercom call.
Intercom ended
The intercom call has just ended.
INTERCOM TO:
(For systems with two or
more handsets)
You have started the intercom process, and need to enter the
number of the handset you wish to call.
Line in use
An extension phone, or one of the handsets is in use.
Low battery
You should charge the battery.
Microphone ON
Mute is off so the other party can hear your voice.
Muted
The microphone is off. The other party cannot hear you.
New voicemail
There are new voicemail messages from your telephone
service provider.
No line
There is no telephone line connection.
No signal,
call ended
The handset is out of range while on a call.
Not available
at this time
Someone else is using the directory or caller ID history.
Other handset
is calling
(For systems with two
handsets)
The other handset is calling.
Out of range OR
No pwr at base
The telephone base has lost power, or the handset is out
of range.
Outside call
You are on the external call during call transfer.
**Paging**
The cordless handset is paged by the telephone base.
Paging
all handsets
The telephone base is paging the handset(s).
Phone
The handset is on a call.
Place in
charger
The battery is very low. The handset should be charged.
1.Press HS LOC
on base 4sec
Screen display before handset registration.
Rec mem full
The system recording time is full.
Handset and telephone base display screen messages
Screen display messages
Appendix