AT&T CL84200 - Manual (Page 35)

29
Telephone base settings
Telephone settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode on the telephone base:
1. Press
MENU/
SELECT
in the idle mode to enter the
main menu.
2. Use q /CID or p/DIR to scroll to >Settings, then
press
MENU
/SELECT.
3. Use q /CID or p/DIR to scroll to >Dial mode, then
press
MENU
/SELECT.
4. Use q /CID or p/DIR to scroll to >Tone or >Pulse,
then press
MENU
/SELECT. There is a confirmation tone.
Press CANCEL to cancel.
Website
Use this feature to view the AT&T website address.
1. Press MENU/
SELECT
in idle mode to enter the
main menu.
2. Use q /CID or p/DIR to scroll to >Website, then
press
MENU
/SELECT.
3. Press CANCEL to cancel.
Home area code
>Dial mode
DIAL MODE
>Tone
>
Website
-End of list-
www.telephones.
att.com