AT&T CL84200 - Manual (Page 30)

24
Telephone base settings
Menu settings
You can use the base menu to change settings. Refer to page 13 to change
the handset settings.
1. Press
MENU/
SELECT
when in idle mode (when the
phone is not in use) to enter the main menu.
2. Press q /CID or p/DIR to scroll to the feature to be
changed. When scrolling through the menu, the
> symbol indicates the selected menu item.
3. Press
MENU
/SELECT to confirm.
NOTE: To cancel an operation, back up to the previous menu or exit the menu display,
press and hold
CANCEL to return to idle mode.
Ringer volume
You can set the ringer volume level (1-6) to one of six
levels or turn the ringer off. When the ringer is off,
appears on the telephone base screen.
1. Press MENU/
SELECT
in idle mode to enter the
main menu.
2. Use q /CID or p/DIR to scroll to >Ringers, then
press
MENU
/SELECT.
3. Press
MENU
/SELECT again to select >Ringer volume.
4. Press q /CID or p/DIR to sample each volume level.
5. Press
MENU
/SELECT to save your preference and return
to the main menu. Press CANCEL to exit.
-OR-
Press pq/VOLUME on the telephone base in idle mode to change the
ringer volume.
NOTE: The telephone base ringer volume also determines the
ringer vol ume for intercom calls (page 39). If the ringer volume is
set to off, that base ringer is silenced for all incoming and intercom calls.
Telephone settings
>
Ringers
Settings
>
Ringer volume
Ringer tone
RINGER VOLUME
RINGER VOLUME
Ringer off
> Play messages
Answering sys