AT&T CL84200 - Manual (Page 46)

40
Multiple handset use
Using the telephone base:
1. Press
INTERCOM on the telephone base,
INTERCOM TO: appears on the screen.
2. Enter a handset number. The screen shows
Calling HANDSET X. If you have a single handset
system, the base displays
Calling HANDSET. The
called handset rings and its screen shows
Base is calling.
3. On the ringing handset, press PHONE/
FLASH
, INT,
/SPEA�ER SPEA�ER or any dial pad keys (0-9, TONE , #) to
answer the intercom call.
NOTES:
1. If you press INTERCOM but there is handsets registered to the telephone base, Int requires
two handsets displays on the base screen.
2. Before the intercom call is answered, you can cancel the intercom call by pressing CANCEL or
INTERCOM on the telephone base.
3. If the called handset is not answered within 100 seconds, or if it is in the directory or call log
mode, or is on a call, or is out of range, the base shows Unable to call. Try again.
4. Pressing OFF/
CLEAR
or MUTE/
DELETE
on a cordless handset temporarily silences the
intercom ringer.
To end the intercom call:
• Press
OFF/
CLEAR
or INT on the cordless handset, or place the handset in
the charger.
-OR-
Press
INTERCOM or CANCEL on the telephone base if you are using
speakerphone mode, or return the corded handset to the telephone base.
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there is a
two-beep call waiting tone.
Using a cordless handset:
To answer the call, press PHONE/
FLASH
. The intercom call ends
automatically. Other system handsets can also answer the incoming call by
pressing PHONE/
FLASH
.
To end the intercom call without answering or canceling the incoming call,
press
OFF/
CLEAR
.
Using the telephone base:
Press
SPEA�ER or lift the corded handset to answer the incoming call. The
intercom call ends automatically.
•
•
Intercom
Base
is calling
Calling
HANDSET X