Ordering information – Red Lion TSC User Manual
Page 7
ORDERING INFORMATION
Note: Output Modules are NOT supplied with the controller. When specifying the controller, be sure to purchase the
appropriate output module for the Main Control Output and if necessary, the alarm output(s) and cooling output.
The controller can be fitted with any combination of output modules that do not have the RS485 option.
The Logic/SSR Drive Module is a switched DC source, intended to drive the DC input of an SSR power unit. It
should never be connected to a line voltage.
All modules are shipped separately and must be installed by the user.
7
MODEL NO
DESCRIPTION
Type 4X/IP65
BEZEL
4 to 20 mA
ANALOG OUTPUT
0 to 10 VDC
ANALOG OUTPUT
ALARM
OUTPUTS
COOLING
OUTPUT
RS485 COM
PART NUMBER
TSC
Temperature
Setpoint
Controller
NO
YES
NO
2
NO
NO
TSC01001
YES
YES
NO
2
NO
NO
TSC11001
YES
YES
NO
1
YES
NO
TSC11002
YES
YES
NO
2
NO
YES
TSC11004
YES
YES
NO
1
YES
YES
TSC11005
YES
NO
YES
2
NO
YES
TSC12004
YES
NO
YES
1
YES
YES
TSC12005
Relay Module
OMD00000
Triac Module
OMD00001
Logic/SSR Drive Module
OMD00003
PMK5
Panel Mount Adapter Kit (1/4 DIN to 1/8 DIN)
PMK50000
RLY
45 A Single Phase Panel Mount SSR
RLY50000
25 A Single Phase DIN Rail Mount SSR
RLY60000
40 A Single Phase DIN Rail Mount SSR
RLY6A000
25 A Three Phase DIN Rail Mount SSR
RLY70000
These models have dual alarm outputs, or single alarm with secondary outputs, with shared common terminals (Form A Type). As a result, these outputs
should be fitted with the same type of output module. The main output (OP1) may be fitted with any type of output