Step 2 test the driver module – HighPoint RocketRAID 2240 User Manual

Page 67

Step 2 Test the Driver Module

Test the driver module to ensure that it works with the system, by loading it during

bootup. If the module has been loaded successfully you should see the RR2240

banner and a display screen of the attached drives. You can now access the drives as

a SCSI device.

Note: If you have no other SCSI device, the first device is /dev/da0, then /dev/da1,

etc.).

Example: F1 FreeBSD

Default: F1

>> FreeBSD/i386 BOOT

Default: 0:ad(0,a)/boot/loader

b o o t :

BTX loader 1.00 BTX version is 1.01

Console: internal video/keyboard

BIOS driver A: is disk0

BIOS driver C: is disk2

BIOS 636kB/74512kB available memory

FreeBSD/i386 bootstrap loader, Revision 0.8

(mailto:[email protected], Sat Apr 21 08:46:19 GMT

2 0 0 1 )

Loading /boot/defaults/loader.conf

/kernel text=0x24f1db data=0x3007ec+0x2062c -

<- For FreeBSD 5.1 and later: select “6” on “Welcome to

FreeBSD” screen.

FreeBSD Driver Support

6-5