HighPoint RocketRAID 2240 - Manual (Page 11)

RocketRAID 2240 Hardware
1 – RocketRAID 2240 Adapter Layout
IBPort1- IBPort4
These represent the RocketRAID 2240’ s 4 Infiniband SATA connectors. Each of
these 4 connectors hosts up to 4 SATA disks, for a total of 16 hard disk drives. These
disks are referred to as “Port” or channels 1-16.
CON1 – CON8
LED connectors (disk-activity/disk-failure): Each Infiniband channel (port) utilizes
two of these connectors. CON1-4 are for use with hard disk activity LED’ s, while
CON5-8 provides disk failure LED support. LED support is discussed in greater detail
in the LED Connection section (page 2-2), and in a separate document, the
RocketRAID 2240 LED guide (which discusses LED installation for specific server
chassis, and will be available in downloadable form from our website).
JP1
SAF-TEE connector (connection between chassis and host adapter)
Speaker (“BEEP1”)
Alarm: the speaker emits an audible alarm in the case of disk/array failure.
RocketRAID 2240 Hardware Description/Installation
2-1