HighPoint RocketRAID 2240 - Manual (Page 30)

Note: If you have specified an initialization option, the initialization process will start
automatically. A progress bar will be displayed towards the bottom of the interface
window, and will indicate % completion, and provide an estimate of the time needed
to complete the initialization procedure.
4 - Deleting an Array
To delete an array:
1. Highlight the “Management” menu, then select the “Array Management”
function.
2. Highlight the array you want to delete, then click on the “Delete Icon” or select
the Delete command from the “Operation” menu.
3. A warning message will appear. Click Yes to delete the array. Click No to stop
this procedure.
Note: An array in use by the operating system cannot be deleted. Any data stored on
a deleted array will be inaccessible.
5 - Configuring Spare Disks
Spare disks can be used to rebuild redundant RAID arrays in the case of failure.
To configure spare disks, highlight the “Management” menu, and select the “Spare
Management” function. The Spare Management window will appear.
To add a spare disk, select it from the Available Disk list box and click the
button to add the disk to the Spare P ool list box.
To remove a spare disk, select it from the Spare Pool list box and click the
button to remove the disk from the Spare Pool list box.
RocketRAID 2240 Driver and Software Installation
4-10