HighPoint RocketHybrid 1222 - Manual (Page 35)

10 - MSU: Creating Hybrid Drives
This section describes the procedure to quickly create a Hybrid Drive that is optimized for either
read/write performance or fault tolerance (reliability).
Note: A Hybrid Drive must contain one HDD and one SSD.
To quickly create Hybrid Drive optimized for performance/reliability
1. Click the Adapter from the left-hand portion of the interface.
2. Mouse-over the Operation tab and select Create HyperDuo, as shown in Figure 4-1.
The Create HyperDuo screen appears, as shown in Figure 4-2.
Figure 4-1 Create Hybrid Drive (HyperDuo)
Figure 4-2 Create Hybrid Drive (HyperDuo) Screen
34