HighPoint RocketHybrid 1222 - Manual (Page 23)

7 - Deleting a Hybrid Drive
This topic describes the procedure to delete a Hybrid Drive using the BIOS interface.
To delete a Hybrid Drive:
WARNING Using Delete permanently erases all data on the Hybrid Drive.
1.
In the Topology pane, select Virtual Disk (Test in Figure 1-17) and press Enter. A menu pops-up,
as shown Figure 1-17.
2. Select Delete to delete the virtual disk, as shown in Figure 1-17.
3. Press Y to select Yes when prompted Do you want to delete this virtual disk?.
4. Press Y to select Yes when prompted Do you want to delete MBR from this virtual disk?
Figure 1-17 Delete Virtual Disk
22