HighPoint RocketHybrid 1222 - Manual (Page 25)

4. Read the License Agreement.
Select I accept the terms of the License Agreement, as shown in Figure 1-3.
5. Select Next, as shown in Figure 1-3, to continue with the installation.
The Choose Components window appears, as shown in Figure 1-4.
Figure 1-4 Choose Components
Note: Installation of the Command Line Interface utility and Flash Command Line Interface utility is optional and disabled by default.
Check these components if you wish to install them.
6. Select Next, as shown in Figure 1-4.
The Choose Install Location window appears, as shown in Figure 1-5, with the default location displayed
in the Destination Folder field.
7. Select Browse, as shown in Figure 1-5, to specify an alternate folder if required.
Figure 1-5 Choose Install Location
24