HighPoint RocketHybrid 1222 - Manual (Page 30)

9.2.2 - Open MSU
Select Open MSU to open MSU in the system’s default browser.
Note: You can also open MSU by double-clicking the Tray Application icon.
9.2.3 - Enable/Disable Alarm
The audible alarm is disabled by default. To enable the audible alarm for critical and warning events,
select Enable Alarm. The alarm is played through speakers connected to the Line Out jack on the
computer’s sound card. On controller HBAs and evaluation boards with on-board buzzer, the hardware
buzzer is also sounded.
Note: The audible alarm uses the file c:/program files/marvell/raid/tray/alarm.wav.
9.2.4 - Enable/Disable Pop-up Event Messages
Event messages are pop-up messages that appear above the System Tray, as shown in
Figure 2-12. Event messages are enabled by default.
Select Enable Event Messages and Disable Event Messages to toggle between enable/disable states.
Figure 2-12 Tray Application: Pop-up Event Message
9.2.5 - View Version Information
Select About Storage Tray to view version information for the MSU Tray Application.
9.2.6 - Exit MSU
Select Exit to exit MSU (and the Tray Application).
29