Vaisala vNet PoE Network Interface - Manual (Page 35)

vNet User’s Guide 29
If the
Keep IP Settings and Administrator Password
option is
unchecked, these additional items are reset to their factory
default settings:
Restarting the vNet Device
Sometimes it is necessary to restart the vNet Device for new
configuration settings to take effect. If restarting is necessary, you
are prompted to restart using the link appearing at the top of your
Web browser.
viewLinc Aware Out Port 9065
viewLinc Aware IP Address 0
Item Setting
UseDhcp True
IpAddr 0.0.0.0
HttpPort 80
SubnetMask 255.255.255.0
GatewayAddr 0.0.0.0
NetBiosName VERITEQXXXXXXXX, where “X” is the
8-digit serial number of the vNet Device
EthDuplex Half
Password dbps
Table 3: Factory Default IP Settings and Administrator Password
Item Setting
Table 2: Factory Default Settings not including IP Settings and
Administrator Password