Vaisala vNet PoE Network Interface - Manual (Page 22)

16 VAISALA
7
Check the
Wait for COM open request before connecting to
device
checkbox, then click
OK
and close all open dialogs.
8
Repeat these steps for all client PCs that have this vNet
Device connected.
Note:
With this option selected, you can access the data log-
ger connected to your vNet Device from multiple cli-
ent PCs.
Device Information
The Device Information settings screen allows you to:
• Identify a contact person who will provide assistance in case of
a problem connecting with the web interface. Note that the
contact person information is stored in the vNet Device for
reference purposes only.
• Specify a name for your vNet Device to make it easy to locate
on your network. This name displays in the Name column of
the Digi Device Discovery screen (
Start | Digi | Digi Device
Discovery
).
Hint: The default device name is VeriteqXXXXXXXX
(X denotes the 8-digit serial number of the vNet
device).
To set the device information for your vNet Device:
1
From the vNet Configuration and Management interface,
choose
Configuration | Network | Device Information
.
2
Enter the contact person for your vNet Device (name, phone
number and/or email address, maximum 63 characters).
3
To change the vNet Device name, enter a description
(maximum 63 characters).
4
Click
Apply
.
Administrator Password
For security purposes, you can change the administrator
password for your vNet Device. The password is case-sensitive,