Vaisala vNet PoE Network Interface - Manual (Page 27)

vNet User’s Guide 21
Network Statistics Table
Use the Network Statistics table to monitor the network activity:
•
Accepted Rx Packets
: The number of received Ethernet packets
that were accepted for further processing.
•
Rejected Rx Packets
: The number of received Ethernet packets
that were rejected for various reasons, such as protocol not
supported, multicast address not supported, or packet errors.
•
Rx Overrun Errors
: The number of times a receive overrun was
detected, i.e., one or more packets were dropped because the
receive buffer was already full with previously received packets
that had not yet been processed.
•
Transmitted Packets
: The number of Ethernet packets that
were transmitted by the vNet Device.
•
Stale Connections
: The number of times a TCP connection for
RealPort or Raw TCP was closed because it was “stale” or “half-
open”.
•
Last Restart Date
: The date/time when the vNet Device was last
restarted.
Note:
Restarting the vNet Device will reset the network sta-
tistics counters to zero, and update the last restart
date.
Power Settings
To view current settings such as fan speed and power supply
voltage, from the vNet Configuration and Management Interface,
choose
Management | Power.
Current settings display. You may be able to change some of these
settings, depending on the vNet Device model.
If the power supply input voltage and fan speed are displayed,
click
Refresh
to update the values.