State GS6 75 YRVHTL - Manual (Page 41)

GAS CONTROL VALVE/THERMOSTAT
ON/OFF
SWITCH TEMPERATURE
SETTING DIAL
155°F
70°F
130°F 140°F 150°F
120°F 110°F
Figure 48.
Temperature
Dial Setting
Approximate
Temperature
°F
Time to induce a 2nd
and 3rd Degree burn
to adult skin
VERY HOT 155 Less than 1 second
C 150 About 1.5 seconds
B 140 Less than 5 seconds
A 130 More than 30 seconds
HOT 120 More than 5 minutes
LOW 110 Normal shower temp
VAC 70 N/A
Table 4.
Note: The temperatures indicated are approximates. The
actual temperature of the heated water may vary.
The Vacation Setting (VAC) sets the controller at
approximately 70°F. This setting is recommended when
the water heater is not in use for a long period of time. This
effectively turns the controller temperature setting down to
a temperature that prevents the water in the water heater
from freezing while still conserving energy.
www.statewaterheaters.com 41