PortaTree Snowmobile Tracks User Manual
Page 3
semi-gloss or satin). You can do the same to the pre-stage, but it is not necessary. After the
detectors are set and aligned, covers must be made to keep the detectors out of the direct sunlight
and heavy moisture conditions (direct rain).
13. All detectors must have covers over them to keep them out of the weather and to keep the sun from
directly contacting them. The starting line can take additional to set up correctly so you may want to
make permanent type fixtures that allow for quick setup.
Please be very careful during installation to avoid lengthy trouble shooting. If you have any
questions, please call.
We recommend setting the system up in good sized building first and running some indoor foot races to
fully understand the system.
Please read the attached snowmobile photo cell height and distance sheet that is attached.
IF YOU HAVE ANY QUESTIONS PLEASE:
Call: 508-278-2199 ext: 508
Fax: 508-278-5887
Email:
Portatree Timing Systems, Inc.
594 BLACKSTONE STREET
PO BOX 206
UXBRIDGE, MA 01569