Monoprice PID 9205 Plug Play Wireless Day and Night Network IP Camera with Audio MPEG4 - Manual (Page 50)

Plug & Play Wireless Day and Night NetworkCamera
50
Appendix E. 3GPP/ISMA Operation
3GPP/ISMA operation uses the RTSP protocol for 3G mobile devices to display
the video stream from some network devices, including the IP camera. The IC202w
supports the RTSP protocol and the video/audio codecs needed by 3GPP/ISMA. You
only need to access the address rtsp://ip_cam_address/CAM_ID.password on the 3G
mobile device to access the video of the IP camera. No additional configuration is
required on the IP camera. Note that "ip_cam_address" is the public IP address of the
IP camera, "CAM_ID" is the unique Camera ID of the specific IP camera, and
"password" is the video play password of the specific IP camera (detailed in section
3.6). Different 3G mobile devices may require different operations to enter the RTSP
address. Please contact the 3G mobile device's customer service for more details.
The video quality and resolution is the same value as set on the "video settings”
page. Since the bandwidth provided by the 3G service is less than 256kbps, it is
recommended to configure the "Internet speed” of the IP camera to 128k or 64k bps.
Note 1: when the audio microphone is enabled on the IP camera, if the "Internet
speed” in "video settings” page is larger than 256k or the resolution is 640x480, the
audio will be disabled for 3GPP/ISMA access. In all other cases, the 3G mobile device
will be able to hear the audio from the IP camera.
Note 2: when the audio microphone is enabled on the IP camera, if there is any
3G mobile access to the IP camera with audio enabled, there will be no audio in the
CamView software window for this IP camera.
iPhone users please download the MonoCam app from iTunes App Store.