Monoprice PID 9205 Plug Play Wireless Day and Night Network IP Camera with Audio MPEG4 - Manual (Page 40)

Plug & Play Wireless Day and Night NetworkCamera
40
3.18. Set To Factory Default
If you forget your password or want to erase all information from the IP CAM, you
can reset all the settings back to where they were when the IP CAM left the factory.
To do this, simply press and hold the reset button on the back of the IP CAM for at
least 4 seconds, then release it. This should be done while the IP CAM is powered on.
The IP CAM's settings will be reset to factory defaults and it will automatically reboot.
After a successful reset the web login account username will be "admin” and there
will be no login password. Also, the play-video password will be "ipcam” after a reset
to factory default.
Figure 3-25: Stick on the reset button to set to the factory default