Monoprice PID 9205 Plug Play Wireless Day and Night Network IP Camera with Audio MPEG4 - Manual (Page 10)

Plug & Play Wireless Day and Night NetworkCamera
10
computer running Microsoft Windows OS. Run the CamViewInstaller-xxx.exe
installation program on the disk. The program will pop-up some windows asking about
various installation options. Click the "next” button to proceed with the installation.
After installation is complete, there will be a CamView icon on the desktop of your
computer, double-click this icon to run the CamView software.
Figure 2-5: The installation CD disk
Third, use the CamView program to see the video
When the CamView software starts the screen will look similar to the screen
shown in Figure 2-7 below. If the computer running the CamView software is on the
same local area network as the IP CAM, the CAM ID will be displayed in the
Auto-Search list. For example, if the CAM ID is 001-001-029, then the Auto Search list
will show the ID 001001029. If the CAM ID does not show, double-click the
"Auto-Search" button to scan the network for all connected cameras. To view the
video from the IP CAM, simply double-click the CAM ID in the Auto-Search list. A
pop-up window will ask for the password, as shown in Figure 2-8. Enter the password
found on the ID/Password Card (Figure 2-6) and click OK.
Figure 2-6: The ID/Password card