Monoprice PID 9205 Plug Play Wireless Day and Night Network IP Camera with Audio MPEG4 - Manual (Page 25)

Plug & Play Wireless Day and Night NetworkCamera
25
3.7. 3GPP/RTSP Settings
The IP CAM can be viewed from any mobile device running iOS or the Android
operating systems with minimum 3G connectivity (bandwidth directly affects received
video quality). For detailed settings on using mobile devices, refer to Appendix E.
You can enable or disable the ability of mobile devices to access the IP CAM on
this page. If the 3GPP/RTSP feature is disabled, mobile devices will not be able to
access the IP CAM, even with the correct Camera ID and password. When this is
disabled, the rtsp stream with MPEG2 audio will still function. Please refer to
Appendix F for more details about the rtsp stream with MPEG2 audio.
When 3GPP is enabled, the video frame rate, resolution, and bandwidth for 3G
mobile access can be set independently from the video settings for CamView (PC)
software access. The maximum allowed resolution is 352x255 and the maximum
allowed bandwidth is 256 kbps. When audio is enabled for both 3GPP and CamView
(PC), and the video/audio is displayed in CamView, the audio will be disabled in 3G
mobile displays.
The "Access URL” line is the URL address for 3G mobile phone to input for
viewing video from the IP camera. Different 3G mobile devices may need to input this
URL in different areas. Detailed information can be found in the user manual of your
mobile device. Please note that a public IP address is needed for the IP camera, so
that the 3G mobile devices can access the IP camera's video.
The default setting is "Enable 3GPP/RTSP”.
Figure 3-12: 3GPP/RTSP enabled page