Monoprice PID 9205 Plug Play Wireless Day and Night Network IP Camera with Audio MPEG4 - Manual (Page 36)

Plug & Play Wireless Day and Night NetworkCamera
36
3.15. Upgrade
In the event that a newer firmware update is available for this IP CAM, use this
page to load and apply the update. You can upgrade either from an FTP address or
using a file downloaded to a local drive. If updating from an FTP server, you will need
to know the server address, account username/password, and the filename of the
firmware upgrade. During an FTP update the system will display update progress.
Important! While the update is taking place DO NOT turn off or remove power
from the IP CAM. DO NOT attempt to make any other modifications to the IP CAM
settings until the update is completed and the IP CAM has rebooted. If the update
process is interrupted the IP CAM could enter into "Safe Mode" (see section 3.17 for
more information about Safe Mode).
Figure 3-20: Firmware upgrade settings page