Monoprice PID 9205 Plug Play Wireless Day and Night Network IP Camera with Audio MPEG4 - Manual (Page 35)

Plug & Play Wireless Day and Night NetworkCamera
35
3.14. Admin
The Admin page controls access to the IP CAM through the web interface. Here
you can modify the account username and password, which are required to access
the web interface. If you forget your login information, you can reset the IP CAM to the
factory default values, but will lose all your other settings. Refer to section 3.18 for
instructions on performing a reset to factory defaults.
Please note that this account information is different from the video play password
on the "Video settings” page.
Figure 3-19: Admin settings page