Monoprice 9207 IP Camera Converter - Manual (Page 4)

MPEG-4 Video Server
List of Figures and Tables
Figure 2-1: Major connectors in the front panel
Figure 2-2: Connect Ethernet cable to a switch/router.
Figure 2-3: The installation CD disk
Figure 2-4: The ID/Password card
Figure 2-5: Running window of CamView program
Figure 2-6: Pop-up play-video password window
Figure 3-1: Open the web configuration page from CamView software
Figure 3-2: Video server product Web configuration login page
Figure 3-3: Video server product Information page
Figure 3-4: Video display page
Figure 3-5: Video display page when the RS485 function is enabled.
Figure 3-6: Patrol settings page.
Figure 3-7: Network settings page for DHCP function
Figure 3-8: Network settings page for fixed IP address
Figure 3-9: Advanced network settings page
Figure 3-10: Video settings page
Figure 3-11: 3GPP/RTSP enabled page
Figure 3-12: RS485 settings page
Figure 3-13: Email/FTP Alarm page
Figure 3-14: DI/DO Settings page
Figure 3-15: NAS Storage settings page
Figure 3-16: SD-Card settings page
Figure 3-17: SD-Card information page
Figure 3-18: Schedule Management page
Figure 3-19: Led Control settings page
Figure 3-20: System date/time settings page
Figure 3-21: Admin settings page
Figure 3-22: Firmware upgrade settings page
Figure 3-23: Firmware upgrade status page
Figure 3-24: System reboot settings page
Figure 3-25: System reboot under-going page
Figure 3-26: Safe mode information page
Figure 3-27: Set to the default settings
Table A-1: List of tested Wireless AP/router devices
Table A-2: List of tested Wired NAT/router devices
4