Monoprice 9207 IP Camera Converter - Manual (Page 32)

MPEG-4 Video Server
3.13. Led Display Control
The video server product provides the Led Display Control function, you can
enable or disable the led display/indication of the video server product device. The
related settings are explained below:
1. Normal led display – select this to enable the status led and ethernet led display.
2. Turn off led display always – select this to disable the status led and ethernet led
display.
3. Turn off led display after network connected – select this then the led will display
when the Internet connection has some problem, the led display will be off when
the Internet connection is successful.
Figure 3-19: Led Control settings page
32