Monoprice 9207 IP Camera Converter - Manual (Page 38)

MPEG-4 Video Server
3.18. Safe Mode
If by some abnormal operation, for example, powered off during the critical point
of the upgrade procedure, the video server product will enter into the safe mode. In
this mode, you will see the following “Safe mode” page when login into this video
server product. Please do the upgrade operation immediately to recover the system.
On this safe mode, the video server product can not display the video on the
CamView software, but you can still find this video server product on the “Auto
search” list.
The steps to recover from “safe mode” are the followings :
1. Use CamView to locate the video server product by clicking the “Auto Search”
item on the CamView software.
2. Login into the web configuration page of the video server product.
3. Upgrade the firmware from the “Upgrade” page.
Figure 3-26: Safe mode information page
38