Monoprice 9207 IP Camera Converter - Manual (Page 16)

MPEG-4 Video Server
3.3. Network
The Network page allows you to modify the network settings of the wired
Ethernet. The default settings use DHCP to obtain an IP address automatically. In
most of the home and office network environment, there is a DHCP server running. In
this situation, by using this default settings, the video server product can work
immediately in most of the time.
If the Ethernet cable is unplugged, the video server product will lose connection.
But as soon as the Ethernet cable is plugged in again, the video server product will
obtain a new IP address immediately.
Figure 3-7 Network settings page for DHCP function
If the network environment does not support DHCP function, you will need to set
the network settings of the video server product manually. Please fill all the fields
including “IP address”, “Subnet mask”, “Default gateway” and “DNS server” to let the
network work. All these settings must be correct for your network environment,
otherwise the video server product can not work.
The default setting is “Obtain an IP address automatically”.
16