Monoprice 9207 IP Camera Converter - Manual (Page 18)

MPEG-4 Video Server
3.4. Advanced Network
In some special situation, your network environment only provides PPPoE
connection(ADSL service), there is no NAT/router available. You will then need to set
the PPPoE settings in the “Advanced Network” page. Only the PPPoE username and
password are needed to let PPPoE work. After the “Save&Apply” button is pressed,
the PPPoE function will work immediately. You can check the “Registration status” in
the “Information” page to see if the video server product is registered using the
PPPoE connection.
Please be noticed that the DHCP or static IP settings in the “Network” page can
work together with the PPPoE connection. Only that the PPPoE has higher priority, so,
if the PPPoE is working, the video server product will use PPPoE to connect to the
Internet.
The default setting is “Disable PPPoE”.
Figure 3-9: Advanced network settings page
18