GReddy TURBO KITS: Honda Civic Si 2002-05 / T517Z - Manual (Page 11)

(2) Install the exhaust manifold using the
factory gasket.
* Use a new exhaust manifold gasket.
* Use factory nuts on the top side of the
flange.
(Parts used #2, 67)
3-5 Turbocharger
Installation
(1) Wrap the thermo cloth the actuator as
shown.
* The heat off the manifold can damage
the actuator with out the thermo cloth.
(2) Install stud bolts on to the exhaust
manifold, then mount the turbocharger
to the manifold using provided gasket.
(Parts used #1,43,64)
3-6
Oil Pressure Line Connection
(1) Connect the oil pressure line that was
installed in step 3-4 to the turbo using
banjo fitting and copper washers. As
shown.
* Point the banjo fitting towards the
firewall.
(Parts used #19,20)