Telenav for T-Mobile Supported Devices: v5.76 for J2ME devices User Manual
Page 31
Delay - Total time delay caused by traffic conditions, or the sum of delays on each segment.
NOTE:
Delay refers only to the route currently shown.
Go - Distance of road segment.
NOTE:
This is not the distance from the origin but the length of each road segment.
Street - The street or highway name of the road segment.
mph/kph - Average speed on that road segment.
NOTE:
“N/A” is displayed for segments farther than 200 miles away.
TIP:
Highlight a segment or highlight it and press the Talk key to hear incidents.
If you click on an incident line, you can view the details. Below is an explanation of
what you will see on the Traffic Details screen:
Delay - The additional time it will take to travel the segment as compared
with the time it would take if traveling at the posted speed.
Travel Time - Estimated time it will take to travel the segment.
Slowest Speed - Slowest speed observed on the segment.
Average Speed Bar - Average speed of a segment on a scale of 0 to the
maximum-posted speed for that segment.
Incident Detail - Each incident is displayed with the following:
o
Incident icon color-coded by severity
o
Location
o
Additional
comments
NOTE:
If there is no flow information for a segment, the Average Speed
bar on the Details page is grayed out.
©2011 TELENAV, INC.
PAGE 31 OF 71