Telenav Scout v1.2 for Android - Manual (Page 83)

© 2012 Telenav, Inc. Page 83 of 87
24. FAQs
Why do I ne ed the carrier’s data service?
The data plan allows you to access nationwide routes, maps, and Places content from the Scout servers using the data
communication features of your device. These services are different from your cellular airtime. To order a data plan,
please contact your wireless carrier.
How long after I apply for the data service until I can use my Scout system?
With data, you should be able to start using the Scout application right after it has been downloaded.
Why do I get the “GPS Location Settings” prompt when I first launch the application?
You need to turn on the Location settings so your GPS location can be detected, and for features such as navigation to
work within Scout. You will get a prompt message when you first launch the application with instructions on where to
change the Location settings. You must choose “Exit” and manually change the Location settings.
Does Scout use up my voice plan minutes?
Scout uses data to provide its navigation functions. Using data does not use any of your voice minutes. However, the
Speak It feature within the Scout application that allows you to make calls to businesses does use voice minutes.
How do I increase or decrease the voice prompt volume and control the backlighting?
Speaker volume can be controlled with the volume buttons on the side of the device. The backlight can be controlled
from within Scout
’s Menu/Action Overflow >> Settings >> Navigation >> Backlight menu.
How do I conserve battery life on my device?
Set the backlight to “On at Turns” in Menu/Action Overflow >> Settings >> Navigation >> Backlight menu. This
option turns the backlight on only when a turn is approaching.
How accurate is the GPS?
GPS accuracy can range from 20m (approx. 65 ft) to 100m (approx. 328 ft). Most of the time, the GPS is accurate to less
than 50 meters (approx. 164 ft).
What are ideal conditions for GPS navigation?
Ideally, a device with a GPS receiver needs a clear view of the sky, starting from about five to ten degrees above the
horizon. Solid or massive obstructions can reduce accuracy or block GPS signals, and may cause extended initialization
time (time to first GPS fix). Common obstructions include tall buildings, covered parking lots, tunnels, trees, and terrain
features.
If you are parked in a covered parking lot or near a tall building, it is recommended that you move to an open area and
then begin to use Scout.
Why does GPS not work near buildings and other tall objects?
Your device requires signals from GPS satellites in order to work, so it needs a clear view of the sky. Dense materials
(such as concrete, rock, steel, heavy wood), tall buildings, terrain features (like mountains, ridges, and cliffs), and large
trees can block or degrade GPS signals and may make it impossible to determine your location.
GPS satellites are not always immediately overhead and could be anywhere in the skies at any time, even low on the
horizon; however, there are enough satellites in orbit so that four or more will be view of your device if not blocked by
large objects, terrain, or dense materials.
How do I know that my device is receiving GPS signals?
Scout alerts you if your device is not receiving GPS signals. If this happens, move to an area where there is a clear view
of the sky so your device can receive GPS signals from space.