Sper Scientific 850038 Pure Water Meter - Manual (Page 34)

In P8.0, press ENTER to advance to
P8.11. P
ress the UP/DOWN key to
change to P8.X. Ex:UP key to enter
P8.2 or DOWN key to return P8.0.
P8.1 is calibration data for range 1
P8.2 is for range 2, ...... P8.5 is for
range 5. (Fig. AD)
Calibration data and date
(Y-M-D HH:MM:SS) are displayed.
If there is no prior calibration data
at a particular range, the primary
This mode has 5 parameters, P9.1
to P9.5 which display
the probe cell
constantvalue f or diagnostic pur-
poses. Without calibration solution,
the cell constant value will be equal
to the value in P5.2 for 5 ranges.
Otherwise, the cell constant value
will be equal to the value set during
your calibration procedure.
.
J)P9.0:Electrode data:(ELE)
Fig. AD
CON
mS
Y-M-D Y-M-D - -
In P9.0, p ress ENTER to advance to
P9.1. Press UP/DOWN key to change
to P9.X (P9.1~P9.5).Ex: UP key to
enter P9.2 or DOWN key to enter P9.0
(Fig. AE).P9.1 is the cell constant
value for range 1. P9.2 is for range 2,
etc.
33
display will show "---"