Sper Scientific 850038 Pure Water Meter User Manual

Page 27

Text mode
Original mode

Select the auto endpoint "off" to
deactivate this feature.

auto endpoint

Press

UP/DOWN to switch

function on or off (Fig. S). Press
ENTER to confirm the last state and
select P2.4 automatically.

P2.4: ATC or non-ATC: (Atc)
P2.4 allows you to select Automatic
or Manual Temperature Compensation.
The default is ATC.

utomatic

temperature compensation on or off
(Fig. T).

NOTE:
The

default is "Ready Indicator on",

"auto endpoint function off" &
"ATC on"

Press UP/DOWN to switch a

Press ENTER to confirm the last state
and return to P2.0.

P2.3: Auto endpoint function:(AEP)

Fig. S

Fig. T

P2.3 lets you switch on or off the
"Auto endpoint function". Select auto
endpoint "on" to HOLD your
measurement when it is stable for
more than 5 seconds. The display
value will freeze and the HLD indicator
will appear on the LCD. Press the
HLD key again to release the display.