Sper Scientific 850038 Pure Water Meter - Manual (Page 29)

A djust the normalization temperature
o o from 15 to 30 C (59 to 86 F).
o o
The m eter default is 25 C (77 F).
After pressing ENTER, the normali-
zation temperature will flash on the
LCD. Press UP/DOWN to change the
o
value from 15.0 to 30.0 C (59.0~
o
86.0 F). (Fig. X)
Press ENTER to confirm the last
value and advance to P4.3.
Select P4.0 and press ENTER to
advance to
P4.1. Press ENTER again
and the Temperature Coefficient will
flash . Press UP/DOWN to change
the value from 0.0 to 10.0, the unit is
o %/ C (Fig. W). Press ENTER to
confirm the last value and advance to
P4.2 automatically.
The meter will normalize its cond.
measurement to a standard temp.
which you preset.
Fig W
o C
Fig X
o C
NOTE: To know more about the
temperature effect on on measurement,
refer to Appendix D on page 43
28
P4.2: Normalization temperature:(nor)