SIGMA ONYX PRO - Manual (Page 58)

58 www.sigmasport.com
2.2 KEY OCCUPANCY AND NAVIGATION PRINCIPLE
Use the adjusting mechanism to individually
adapt the length of the belt.
Ensure that you set the length of the belt so that
it sits well but is not too tight.
k Start training (START)
k End training (END)
k Save training (SAVE)
k Start another training phase (SKIP) or move to the next
lap (NEXT).
Confirm the function shown in the navigation level with another
click. Use the two lower buttons PLUS /MINUS to change
between the individual menu options on one level.
2.3 FIXING THE CHEST BELT / HANDLEBAR HOLDER
Connect the transmitter with the elastic belt.