Rubbermaid 9VPHEF12 - Manual (Page 7)

12 13
Hang upper hose onto hose hook.
2
E
F
3
B
D
2
1
1
B
D
2
1
1
D
3
D
2
E
F
Remove wand from upper structure. Slide desired accessory tool onto end of wand.
After use, reinsert the wand into channel on rear of vacuum
cleaner. Ensure bottom properly nests into the body, and that
top rests on tab.
To use upper hose without using wand, push the wand release
button to release hose. Pull hose out of wand opening.
Wand/Accessory Usage
Upper Hose/Accessory Usage
Upper Hose/Accessory Usage (cont.)
Slide desired accessory tool into hose opening for use.
After use, reinsert upper hose into wand opening. Push hose
into opening until it snaps into place.
1
4
2
1
2
Cord Storage
Wrap power cord around upper and lower cord wraps.
To release cord, turn upper cord wrap 1/2 turn. Keep cord wrap
in up or down position; do not leave rotated in-between.
Unplug before servicing.
1
Paper Bag Replacement
Pull bag door release handle forward. Tilt bag door forward,
then lift from upper structure.
up
down
2
3
1
2
ENGLISH