Aiphone ISE-100 - Manual (Page 3)

- 3 -
1-2
1-3
1-4
English Package contents (acoustic interface kit IAI-100)
1. Driver unit DR-100
2. Screws
3. Rubber seal
4. Acoustic I/O tube AI-100
5. Temporary installation jig
6. Tube fixer FF-100
7. Counter installation screw
English Package contents (acoustic tube IAX-100)
1. Acoustic tube IAX-100
2. Tube connector
3. Packing (semi-transparent)
1-5
English Package contents (sensor ISE-100)
Optional package
1. Sensor ISE-100
2. Screws
1-6
English Package contents (optional microphone IME-150)
Optional package
• Optional microphone IME-150
English Package contents (gooseneck microphone IME-100)
• Gooseneck microphone IME-100
2 DESCRIPTION
English Description
This security window intercom system provides a means of
communication for two people conducting business on either side
of a security window,such as at a bank,theatre, or law enforcement
facility.
Features
• A new acoustic tube system is used that combines an acoustic
tube speaker with a noise canceling microphone. This ensures
clear sound quality with sufficient volume.
• The use of the new acoustic tube system means that the unit can
be installed without having to make a hole in the barrier glass.
The acoustic tube is long and thin, ensuring that the field of
vision between the operator and the customer is not obstructed.
• The circuit of the noise canceling microphone is built in to the
acoustic tube system, lessening the effects of ambient noise and
making sure the operator accurately hears the customer.
• The sound of the customer's voice is concentrated ensuring that
nothing is misheard,and the voice of the operator is detected by
the VOX circuit and transmitted automatically. This means that
no operations are necessary during communication, making it a
smooth and user-friendly system.
• When the operator leaves the booth or does not want voices from
inside to be heard outside, the system can be put into standby
mode by turning off the TALK switch so that sound is not
transmitted.
• A volume switch is provided that can be changed from "Lo" to
"Hi" when there is an increase in ambient noise or if a customer
is hard of hearing.
• Option: A sensor is available that automatically switches the
system to standby mode when there are no customers (automatic
operation system).
• Option: There is a in-built paging function so that customers in
outside waiting rooms can be easily called. A separate paging
speaker must be installed for this function.
1 3
6
4
2
5
7
DR-100
AI-100
FF-100
1 3 2
1 2