Allied Telesis AR800 Series - Manual (Page 7)

Patch 86231-10 For Rapier Switches and AR800 Series Modular Switching Routers 7
Patch 86231-10 for Software Release 2.3.1
C613-10328-00 REV J
When forwarding a multicast packet to a downstream neighbour, the device
sometimes forwarded two copies of the packet instead of one. This issue has
been resolved.
STP settings were not retained when a port was deleted from the VLAN that
the STP belongs to. This issue has been resolved.
Disabling OSPF caused a fatal error if there was a large routing table. This
issue has been resolved.
The route information for ipRouteEntry of ipGroup in the MIB-II MIB was not
correct. This issue has been resolved.
The IPMTU parameter in the ADD DHCP POLICY command was
accepting values in the range 0-4294967295. This parameter now accepts
values in the correct range of 579-65535.
Occasionally the switch did not forward packets between two VLANs. This
issue has been resolved.
Features in 86231-09
Patch file details are listed in Table 2:
Patch 86231-09 includes all issues resolved and enhancements released in
previous patches for Software Release 2.3.1, and the following enhancements:
When a VLAN port’s layout changed, PIM was not updating correctly. Now
PIM correctly updates a VLAN port’s interface, neighbour and routes.
STP now operates on ports within a trunk group.
PCR: 03422 Module: PIM Level: 2
PCR: 03432 Module: STP Level: 2
PCR: 03457 Module: OSPF Level: 2
PCR: 03458 Module: IPG Level: 3
PCR: 03465 Module: DHCP Level: 2
PCR: 03486 Module: SWI Level: 2
Table 2: Patch file details for Patch 86231-09.
Base Software Release File 86s-231.rez
Patch Release Date 24-Dec-2002
Compressed Patch File Name 86231-09.paz
Compressed Patch File Size 906911 bytes
PCR: 02023 Module: PIM, VLAN Network affecting: No
PCR: 02171 Module: STP, SWITCH, VLAN Network affecting: No